Milliput: Terracotta (4oz/pack)

Milliput Terracotta is a two part epoxy putty in a terracotta tone, for modelers, sculptors and anyone restoring pots, urns or brickwork.

Milliput is a cold setting, non shrinking putty. Knead equal amounts of the two sticks for at least five minutes, until the color is even with no streaks, then mix for one more minute. When first mixed it is pliable and easily shaped, and wiping it with a finely woven moist cloth gives a very smooth finish. It sets rock hard in three to four hours at 20 to 25 degrees C.

Milliput lists modelmaking, sculpting and picture frame restoration among its typical uses, along with repairs to terracotta pots, garden urns, damaged brickwork and quarry tiles, indoors and out. It also works under water. Once cured it can be drilled, filed, sanded and painted.

Key Features

• Terracotta color for pots, urns and brickwork
• Smooths to a fine finish with a moist cloth
• Non shrinking, sets under water, heat resistant to 130 degrees C
• Can be machined, drilled, filed, sanded and painted once cured

What's In The Box

• 1 x Component A stick (56.7g)
• 1 x Component B stick (56.7g)

Product Information

• Type: Two part epoxy putty
• Weight: 113.4g (4oz)
• Maker: Milliput
• Warning: Keep out of reach of young children. In the putty state Milliput may cause irritation to sensitive skins: use rubber or disposable polythene gloves when mixing, and wash hands with soap and warm water after use.
• MPN: MLPUT-TRCOT
• Barcode: 5035167000513
• Condition: New