{"title":"Glue \u0026 Putty","description":"\u003cp\u003ePlastic cement, super glue, PVA, epoxy putty and fillers: everything that holds a model together and fills the gaps.\u003c\/p\u003e","products":[{"product_id":"milliput-black-4ozpack","title":"Milliput: Black (4oz\/pack)","description":"\u003cp\u003e\u003cstrong\u003eMilliput Black is a two part epoxy putty that cures black, for modelers and restorers who want to match a black surface without painting it afterwards.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMilliput is a cold setting, non shrinking putty. Knead equal amounts of the two sticks for at least five minutes, until the color is even with no streaks, then mix for one more minute. It starts soft and highly adhesive, then sets rock hard in three to four hours at 20 to 25 degrees C; gentle heat shortens that. It keeps curing after it sets, and wet fingers or tools stop it sticking and smooth the surface.\u003c\/p\u003e\u003cp\u003eOnce cured it can be drilled, filed and sanded while keeping its bonding strength. Milliput lists antique clocks, guttering, ebonized wood, marble, slate, cast iron, black plastic parts and jewelry making among its typical uses.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack grade that matches dark surfaces without paint\u003c\/li\u003e\n\u003cli\u003eNon shrinking, and sets under water\u003c\/li\u003e\n\u003cli\u003eHeat resistant up to 130 degrees C\u003c\/li\u003e\n\u003cli\u003eCan be machined, drilled, filed, sanded and painted once cured\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's In The Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 x Component A stick (56.7g)\u003c\/li\u003e\n\u003cli\u003e1 x Component B stick (56.7g)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Two part epoxy putty\u003c\/li\u003e\n\u003cli\u003eWeight: 113.4g (4oz)\u003c\/li\u003e\n\u003cli\u003eMaker: Milliput\u003c\/li\u003e\n\u003cli\u003eWarning: Keep out of reach of young children. In the putty state Milliput may cause irritation to sensitive skins: use rubber or disposable polythene gloves when mixing, and wash hands with soap and warm water after use.\u003c\/li\u003e\n\u003cli\u003eMPN: MLPUT-BLK\u003c\/li\u003e\n\u003cli\u003eBarcode: 5035167005372\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milliput","offers":[{"title":"Default Title","offer_id":45644196675775,"sku":"PUT-MIL-0001","price":8.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/PUT-MIL-0001-1-lead.png?v=1790641406"},{"product_id":"milliput-metallic-4ozpack","title":"Milliput: Metallic (4oz\/pack)","description":"\u003cp\u003e\u003cstrong\u003eMilliput Metallic is a two part epoxy putty with an effects pigment that gives the cured putty the look of shiny metal, for modelers and anyone repairing metal parts.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLike every Milliput grade it is a cold setting putty: knead equal amounts of resin and hardener until the color is even with no streaks, and it hardens in three to four hours depending on room temperature. While soft it can be smoothed with water, and it cures even under water.\u003c\/p\u003e\u003cp\u003eThe metallic finish suits sculpts for military, railway, farm and naval models, and the putty can also fill chips, holes and damage in metal surfaces, or restore statues, so the repair blends in. Once hardened it can be machined, drilled, tapped, turned, filed, sawn, sanded and painted, and it bonds to wood, brick, cement, metals, concrete, plastics and glass.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEffects pigment gives a shiny metal look once cured\u003c\/li\u003e\n\u003cli\u003eHardens in three to four hours at room temperature\u003c\/li\u003e\n\u003cli\u003eCures under water and resists heat up to 130 degrees C\u003c\/li\u003e\n\u003cli\u003eSmooths with water while soft\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's In The Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 x resin stick (56.7g)\u003c\/li\u003e\n\u003cli\u003e1 x hardener stick (56.7g)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Two part epoxy putty\u003c\/li\u003e\n\u003cli\u003eWeight: 113.4g (4oz)\u003c\/li\u003e\n\u003cli\u003eMaker: Milliput\u003c\/li\u003e\n\u003cli\u003eWarning: Keep out of reach of young children. In the putty state Milliput may cause irritation to sensitive skins: use rubber or disposable polythene gloves when mixing, and wash hands with soap and warm water after use.\u003c\/li\u003e\n\u003cli\u003eMPN: MLPUT-METAL\u003c\/li\u003e\n\u003cli\u003eBarcode: 745314017497\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milliput","offers":[{"title":"Default Title","offer_id":45644196708543,"sku":"PUT-MIL-0002","price":8.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/Metallic_f6970689-2d04-4e11-84cc-6a7e8c1f391d.png?v=1779638145"},{"product_id":"milliput-silver-grey-4ozpack","title":"Milliput: Silver Grey (4oz\/pack)","description":"\u003cp\u003e\u003cstrong\u003eMilliput Silver Grey is a two part epoxy putty, slightly finer than Standard Milliput, for modelers, sculptors and restorers working on stone colored pieces.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMilliput is a cold setting, non shrinking putty. Knead equal amounts of the two sticks for at least five minutes, until the color is even with no streaks, then mix for one more minute. It starts soft and highly adhesive, then sets rock hard in three to four hours at 20 to 25 degrees C, and wet fingers or tools stop it sticking and smooth the surface.\u003c\/p\u003e\u003cp\u003eMilliput recommends Silver Grey for work that does not need extremely fine detail, and names it as ideal for repairing stone colored garden ornaments. Typical uses include modelmaking, sculpting and ceramic restoration. Once cured it can be drilled, filed, sanded and painted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSlightly finer grain than Standard Milliput\u003c\/li\u003e\n\u003cli\u003eGray tone suited to stone colored repairs\u003c\/li\u003e\n\u003cli\u003eNon shrinking, sets under water, heat resistant to 130 degrees C\u003c\/li\u003e\n\u003cli\u003eCan be machined, drilled, filed, sanded and painted once cured\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's In The Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 x Component A stick (56.7g)\u003c\/li\u003e\n\u003cli\u003e1 x Component B stick (56.7g)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Two part epoxy putty\u003c\/li\u003e\n\u003cli\u003eWeight: 113.4g (4oz)\u003c\/li\u003e\n\u003cli\u003eMaker: Milliput\u003c\/li\u003e\n\u003cli\u003eWarning: Keep out of reach of young children. In the putty state Milliput may cause irritation to sensitive skins: use rubber or disposable polythene gloves when mixing, and wash hands with soap and warm water after use.\u003c\/li\u003e\n\u003cli\u003eMPN: MLPUT-SLGRY\u003c\/li\u003e\n\u003cli\u003eBarcode: 5035167000520\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milliput","offers":[{"title":"Default Title","offer_id":45644196741311,"sku":"PUT-MIL-0003","price":8.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/PUT-MIL-0003-1-lead.png?v=1790641406"},{"product_id":"milliput-standard-4ozpack","title":"Milliput: Standard (4oz\/pack)","description":"\u003cp\u003e\u003cstrong\u003eMilliput Standard is the general purpose yellow gray grade of Milliput two part epoxy putty, for modelers, sculptors and anyone with a tough repair to make.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMilliput is a cold setting, non shrinking putty. Knead equal amounts of the two sticks for at least five minutes, until the color is even with no streaks, then mix for one more minute. It starts soft and highly adhesive, then sets rock hard in three to four hours at 20 to 25 degrees C; gentle heat shortens that. Wet fingers or tools stop it sticking and smooth the surface.\u003c\/p\u003e\u003cp\u003eMilliput lists modelmaking, sculpting, jewelry making and picture frame restoration among its typical uses, along with filling dents in metal, plastic or wood, plumbing repairs and sealing on boat decks and hulls. Once cured it can be drilled, filed, sanded and painted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGeneral purpose grade in yellow gray\u003c\/li\u003e\n\u003cli\u003eNon shrinking, and sets under water\u003c\/li\u003e\n\u003cli\u003eHeat resistant up to 130 degrees C\u003c\/li\u003e\n\u003cli\u003eCan be machined, drilled, filed, sanded and painted once cured\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's In The Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 x Component A stick (56.7g)\u003c\/li\u003e\n\u003cli\u003e1 x Component B stick (56.7g)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Two part epoxy putty\u003c\/li\u003e\n\u003cli\u003eWeight: 113.4g (4oz)\u003c\/li\u003e\n\u003cli\u003eMaker: Milliput\u003c\/li\u003e\n\u003cli\u003eWarning: Keep out of reach of young children. In the putty state Milliput may cause irritation to sensitive skins: use rubber or disposable polythene gloves when mixing, and wash hands with soap and warm water after use.\u003c\/li\u003e\n\u003cli\u003eMPN: MLPUT-STDRD\u003c\/li\u003e\n\u003cli\u003eBarcode: 5035167000490\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milliput","offers":[{"title":"Default Title","offer_id":45644196774079,"sku":"PUT-MIL-0004","price":5.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/PUT-MIL-0004-1-lead.png?v=1789867968"},{"product_id":"milliput-superfine-white-4ozpack","title":"Milliput: Superfine White (4oz\/pack)","description":"\u003cp\u003e\u003cstrong\u003eMilliput Superfine White is a two part epoxy putty formulated for a fine finish, for figure sculptors, modelers and restorers of porcelain and ceramics.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMilliput is a cold setting, non shrinking putty that starts soft and highly adhesive, then sets rock hard in three to four hours at 20 to 25 degrees C. The two sticks of this grade are virtually the same color, so Milliput stresses mixing equal amounts for at least five minutes. Wet fingers, tools or a fine moist cloth give a smooth surface.\u003c\/p\u003e\u003cp\u003eSuperfine White is made for work where a fine finish matters, including rebuilding missing parts of porcelain. Milliput also lists modeling, sculpting, jewelry making, picture frame restoration and filling chips in white baths, tiles and appliances. Once cured it can be drilled, filed, sanded and painted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuperfine grade, made for a fine finish\u003c\/li\u003e\n\u003cli\u003eWhite putty for porcelain, ceramics and figure work\u003c\/li\u003e\n\u003cli\u003eNon shrinking, sets under water, heat resistant to 130 degrees C\u003c\/li\u003e\n\u003cli\u003eCan be machined, drilled, filed, sanded and painted once cured\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's In The Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 x Component A stick (56.7g)\u003c\/li\u003e\n\u003cli\u003e1 x Component B stick (56.7g)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Two part epoxy putty\u003c\/li\u003e\n\u003cli\u003eWeight: 113.4g (4oz)\u003c\/li\u003e\n\u003cli\u003eMaker: Milliput\u003c\/li\u003e\n\u003cli\u003eWarning: Keep out of reach of young children. In the putty state Milliput may cause irritation to sensitive skins: use rubber or disposable polythene gloves when mixing, and wash hands with soap and warm water after use.\u003c\/li\u003e\n\u003cli\u003eMPN: MLPUT-SUPWT\u003c\/li\u003e\n\u003cli\u003eBarcode: 5035167000506\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milliput","offers":[{"title":"Default Title","offer_id":45644196806847,"sku":"PUT-MIL-0005","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/PUT-MIL-0005-1-lead.png?v=1790334284"},{"product_id":"milliput-terracotta-4ozpack","title":"Milliput: Terracotta (4oz\/pack)","description":"\u003cp\u003e\u003cstrong\u003eMilliput Terracotta is a two part epoxy putty in a terracotta tone, for modelers, sculptors and anyone restoring pots, urns or brickwork.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMilliput is a cold setting, non shrinking putty. Knead equal amounts of the two sticks for at least five minutes, until the color is even with no streaks, then mix for one more minute. When first mixed it is pliable and easily shaped, and wiping it with a finely woven moist cloth gives a very smooth finish. It sets rock hard in three to four hours at 20 to 25 degrees C.\u003c\/p\u003e\u003cp\u003eMilliput lists modelmaking, sculpting and picture frame restoration among its typical uses, along with repairs to terracotta pots, garden urns, damaged brickwork and quarry tiles, indoors and out. It also works under water. Once cured it can be drilled, filed, sanded and painted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTerracotta color for pots, urns and brickwork\u003c\/li\u003e\n\u003cli\u003eSmooths to a fine finish with a moist cloth\u003c\/li\u003e\n\u003cli\u003eNon shrinking, sets under water, heat resistant to 130 degrees C\u003c\/li\u003e\n\u003cli\u003eCan be machined, drilled, filed, sanded and painted once cured\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's In The Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 x Component A stick (56.7g)\u003c\/li\u003e\n\u003cli\u003e1 x Component B stick (56.7g)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Two part epoxy putty\u003c\/li\u003e\n\u003cli\u003eWeight: 113.4g (4oz)\u003c\/li\u003e\n\u003cli\u003eMaker: Milliput\u003c\/li\u003e\n\u003cli\u003eWarning: Keep out of reach of young children. In the putty state Milliput may cause irritation to sensitive skins: use rubber or disposable polythene gloves when mixing, and wash hands with soap and warm water after use.\u003c\/li\u003e\n\u003cli\u003eMPN: MLPUT-TRCOT\u003c\/li\u003e\n\u003cli\u003eBarcode: 5035167000513\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milliput","offers":[{"title":"Default Title","offer_id":45644196839615,"sku":"PUT-MIL-0006","price":6.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/PUT-MIL-0006-1-lead.png?v=1790641406"},{"product_id":"milliput-turquoise-blue-4ozpack","title":"Milliput: Turquoise Blue (4oz\/pack)","description":"\u003cp\u003e\u003cstrong\u003eMilliput Turquoise Blue is a two part epoxy putty in a bright blue, for woodturners, jewelry makers, sculptors and modelers.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMilliput added Turquoise Blue in 2019 after makers, woodturners especially, asked for a blue grade. It works like every Milliput: knead equal amounts of the two sticks for at least five minutes until the color is even with no streaks, and it sets rock hard in three to four hours at 20 to 25 degrees C without shrinking. Wet fingers or tools stop it sticking and smooth the surface.\u003c\/p\u003e\u003cp\u003eMilliput names woodturning, jewelry making, sculpting, marbling and woodwork as uses, and different shades can be blended by cross mixing it with other Milliput colors. Once cured it can be drilled, filed, sanded and painted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTurquoise blue color for woodturning, marbling and jewelry\u003c\/li\u003e\n\u003cli\u003eBlends with other Milliput colors by cross mixing\u003c\/li\u003e\n\u003cli\u003eSets rock hard in three to four hours at room temperature\u003c\/li\u003e\n\u003cli\u003eNon shrinking, sets under water, heat resistant to 130 degrees C\u003c\/li\u003e\n\u003cli\u003eCan be machined, drilled, filed, sanded and painted once cured\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's In The Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 x Component A stick (56.7g)\u003c\/li\u003e\n\u003cli\u003e1 x Component B stick (56.7g)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Two part epoxy putty\u003c\/li\u003e\n\u003cli\u003eWeight: 113.4g (4oz)\u003c\/li\u003e\n\u003cli\u003eMaker: Milliput\u003c\/li\u003e\n\u003cli\u003eWarning: Keep out of reach of young children. In the putty state Milliput may cause irritation to sensitive skins: use rubber or disposable polythene gloves when mixing, and wash hands with soap and warm water after use.\u003c\/li\u003e\n\u003cli\u003eMPN: MLPUT-TRQBL\u003c\/li\u003e\n\u003cli\u003eBarcode: 710535678574\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Milliput","offers":[{"title":"Default Title","offer_id":45644196872383,"sku":"PUT-MIL-0007","price":10.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/PUT-MIL-0007-1-lead.png?v=1790641406"},{"product_id":"ak-interactive-quick-cement-extra-thin","title":"AK Interactive: Quick Cement Extra Thin","description":"\u003cp\u003e\u003cstrong\u003eAK Interactive Quick Cement Extra Thin is a very fast drying liquid cement for plastic kits and miniatures, made for joints with little contact surface.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt works by capillary action. Hold the parts together, touch the brush to the seam, and the thin liquid runs along the joint by itself, so small or awkward pieces can be glued without smearing cement over the surrounding detail. Unlike slower plastic adhesives it dries very quickly, which is what makes it so effective on parts that meet along a thin edge or at a single small point. AK Interactive rates it as the fastest and strongest glue on the market.\u003c\/p\u003e\u003cp\u003eThe 40ml bottle sits on a square anti rolling base, so it stays upright on a crowded bench, and the cap carries an ultra thin precision brush in maxoma fiber for controlled application on fine parts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGlues by capillary action\u003c\/li\u003e\n\u003cli\u003eVery quick drying\u003c\/li\u003e\n\u003cli\u003eStrong joints on parts with little contact surface\u003c\/li\u003e\n\u003cli\u003eUltra thin maxoma fiber precision brush in the cap\u003c\/li\u003e\n\u003cli\u003eSquare anti rolling base\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVolume: 40ml\u003c\/li\u003e\n\u003cli\u003eType: extra thin liquid plastic cement\u003c\/li\u003e\n\u003cli\u003eApplicator: ultra thin precision brush in the cap\u003c\/li\u003e\n\u003cli\u003eMaker: AK Interactive\u003c\/li\u003e\n\u003cli\u003eMPN: AK-12001\u003c\/li\u003e\n\u003cli\u003eBarcode: 8435568304840\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AK Interactive","offers":[{"title":"Default Title","offer_id":46028089491647,"sku":"ADH-AKI-0009","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/AK12001_web.jpg?v=1786932477"},{"product_id":"ak-interactive-extra-thin-cement","title":"AK Interactive: Extra Thin Cement","description":"\u003cp\u003e\u003cstrong\u003eAK Interactive Extra Thin Cement is a liquid plastic cement for general kit and miniature assembly, applied by capillary action.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFit the parts together first, then touch the brush to the seam: the thin liquid is drawn into the joint by capillary action, so the cement goes where the parts meet rather than over the detail around them. Drying time is medium to fast, which leaves a short window to nudge a part into line before it sets, and the viscosity is suited to modeling plastic. AK Interactive calls it the best option for general assembly work.\u003c\/p\u003e\u003cp\u003eThe 40ml bottle has a square anti rolling base to keep it upright on the bench, and the cap holds an ultra thin precision brush in maxoma fiber for accurate work on small parts and tight seams.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGlues by capillary action\u003c\/li\u003e\n\u003cli\u003eMedium to fast drying time\u003c\/li\u003e\n\u003cli\u003eMade for general assembly work\u003c\/li\u003e\n\u003cli\u003eUltra thin maxoma fiber precision brush in the cap\u003c\/li\u003e\n\u003cli\u003eSquare anti rolling base\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVolume: 40ml\u003c\/li\u003e\n\u003cli\u003eType: extra thin liquid plastic cement\u003c\/li\u003e\n\u003cli\u003eApplicator: ultra thin precision brush in the cap\u003c\/li\u003e\n\u003cli\u003eMaker: AK Interactive\u003c\/li\u003e\n\u003cli\u003eMPN: AK-12002\u003c\/li\u003e\n\u003cli\u003eBarcode: 8435568304857\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AK Interactive","offers":[{"title":"Default Title","offer_id":46028089524415,"sku":"ADH-AKI-0010","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/AK12002_web.jpg?v=1786932477"},{"product_id":"ak-interactive-plastic-cement-standard-density","title":"AK Interactive: Plastic Cement Standard Density","description":"\u003cp\u003e\u003cstrong\u003eAK Interactive Plastic Cement Standard Density is the classic modeling glue for assembling plastic kits, with a thicker brush for larger surfaces.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhere an extra thin cement is run into a seam after the parts are fitted, this one glues by contact: brush it onto the mating surface, then press the parts together. It has more viscosity and a medium drying time, so it stays where you put it on broad joints and gives you a moment to position the part, then acts within a few seconds.\u003c\/p\u003e\u003cp\u003eThe cap carries a thicker, standard application brush in maxoma fiber, sized for larger surfaces and general assembly rather than pinpoint work. The 40ml bottle stands on a square anti rolling base so it is hard to knock over mid build. AK Interactive recommends it for the assembly of plastic models.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNormal density, more viscous than thin cements\u003c\/li\u003e\n\u003cli\u003eGlues by contact, quick drying\u003c\/li\u003e\n\u003cli\u003eThicker maxoma fiber brush for larger surfaces\u003c\/li\u003e\n\u003cli\u003eActs in a few seconds\u003c\/li\u003e\n\u003cli\u003eSquare anti rolling base\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVolume: 40ml\u003c\/li\u003e\n\u003cli\u003eType: standard density plastic cement\u003c\/li\u003e\n\u003cli\u003eApplicator: standard brush in the cap\u003c\/li\u003e\n\u003cli\u003eMaker: AK Interactive\u003c\/li\u003e\n\u003cli\u003eMPN: AK-12003\u003c\/li\u003e\n\u003cli\u003eBarcode: 8435568304864\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AK Interactive","offers":[{"title":"Default Title","offer_id":46028089557183,"sku":"ADH-AKI-0011","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/AK12003_web.jpg?v=1786932478"},{"product_id":"ak-interactive-wolverine-p-v-a-glue-100ml","title":"AK Interactive: Wolverine P.V.A Glue (100ml)","description":"\u003cp\u003e\u003cstrong\u003eAK Interactive Wolverine P.V.A. Glue is a high strength white glue with a drying accelerator, for transparent parts and porous modeling materials.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWolverine has all the properties of a normal white glue but dries faster. It is especially suitable for work on transparent parts and for joints that need to be both strong and invisible. It bonds wood, paper, cardboard, cork, wicker, polystyrene and foam.\u003c\/p\u003e\u003cp\u003eThe glue is high viscosity and spreads very smoothly, and it can be thinned with water to reach the consistency the job needs. Apply it at temperatures between 10 and 35 C (50 to 95 F) and a relative humidity of no more than 70%. Full cure takes about 6 hours, depending on room temperature and the thickness applied.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWhite PVA glue with a drying accelerator\u003c\/li\u003e\n\u003cli\u003eStrong, invisible joints, suited to transparent parts\u003c\/li\u003e\n\u003cli\u003eBonds wood, paper, cardboard, cork, wicker, polystyrene and foam\u003c\/li\u003e\n\u003cli\u003eThins with water\u003c\/li\u003e\n\u003cli\u003eFull cure in about 6 hours\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVolume: 100ml\u003c\/li\u003e\n\u003cli\u003eType: PVA white glue with drying accelerator\u003c\/li\u003e\n\u003cli\u003eCure: about 6 hours, depending on temperature and thickness\u003c\/li\u003e\n\u003cli\u003eMaker: AK Interactive\u003c\/li\u003e\n\u003cli\u003eMPN: AK-12014\u003c\/li\u003e\n\u003cli\u003eBarcode: 8435568305595\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AK Interactive","offers":[{"title":"Default Title","offer_id":46028089589951,"sku":"ADH-AKI-0016","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/AK12014_web.jpg?v=1786932479"},{"product_id":"ak-interactive-magnet-cyanoacrylate-glue","title":"AK Interactive: Magnet Cyanoacrylate Glue","description":"\u003cp\u003e\u003cstrong\u003eAK Interactive Magnet Standard Density is an ultra resistant cyanoacrylate glue in a large 20g pot, the all round super glue of AK's Magnet family.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eStandard density sits between thin and thick cyanoacrylates, which is why it suits such a wide variety of applications. It gives a durable, strong bond in just a few seconds and is suited to small parts with a small contact surface.\u003c\/p\u003e\u003cp\u003eThe 20g pot is the large format of the range, for builders who get through a lot of glue. Note that the bottles are deliberately not filled to 100%: AK leaves some air inside so the glue works properly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStandard density cyanoacrylate\u003c\/li\u003e\n\u003cli\u003eDurable, strong bond in a few seconds\u003c\/li\u003e\n\u003cli\u003eSuited to small parts with a small contact surface\u003c\/li\u003e\n\u003cli\u003eLarge 20g format\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 20g\u003c\/li\u003e\n\u003cli\u003eType: standard density cyanoacrylate glue\u003c\/li\u003e\n\u003cli\u003eMaker: AK Interactive\u003c\/li\u003e\n\u003cli\u003eMPN: AK-12015\u003c\/li\u003e\n\u003cli\u003eBarcode: 8435568305724\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AK Interactive","offers":[{"title":"Default Title","offer_id":46028089622719,"sku":"ADH-AKI-0002","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/AK12015_NEW-FORMULA.jpg?v=1786932479"},{"product_id":"ak-interactive-flash-accelerator-for-cyanoacrylate-glue","title":"AK Interactive: Flash Accelerator for Cyanoacrylate Glue","description":"\u003cp\u003e\u003cstrong\u003eAK Interactive Flash Accelerator is a 200ml activator spray for cyanoacrylate glue that takes curing from seconds to virtually instant.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCyanoacrylate normally needs a few seconds of holding before a joint grabs. Flash is formulated to accelerate that curing process, so once it is applied the glue sets almost immediately. That makes it useful wherever a part is hard to hold still, such as a small arm on a miniature or a join at an awkward angle.\u003c\/p\u003e\u003cp\u003eThe aerosol format lays down a fast, even coat, which keeps the bond clean and precise. AK Interactive describes it for modeling work and any other job that needs immediate, high precision fixing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eActivator for cyanoacrylate glue\u003c\/li\u003e\n\u003cli\u003eCuts curing time from seconds to virtually instant\u003c\/li\u003e\n\u003cli\u003eAerosol for fast, even application\u003c\/li\u003e\n\u003cli\u003eClean, precise bonds\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVolume: 200ml\u003c\/li\u003e\n\u003cli\u003eType: cyanoacrylate activator spray\u003c\/li\u003e\n\u003cli\u003eFormat: aerosol\u003c\/li\u003e\n\u003cli\u003eMaker: AK Interactive\u003c\/li\u003e\n\u003cli\u003eMPN: AK-12026\u003c\/li\u003e\n\u003cli\u003eBarcode: 8435568309142\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AK Interactive","offers":[{"title":"Default Title","offer_id":46028089721023,"sku":"ADH-AKI-0001","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/AK12026.jpg?v=1786932480"},{"product_id":"ak-interactive-professional-plastic-glue-30g","title":"AK Interactive: Professional Plastic Glue 30g","description":"\u003cp\u003e\u003cstrong\u003eAK Interactive Professional Plastic Glue is a 30g plastic adhesive with a precision metal nozzle for fine, detailed joints.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is formulated specifically for bonding plastics such as styrene, ABS and PVC, the materials most plastic kits and scratch built parts are made from.\u003c\/p\u003e\u003cp\u003eThe difference is in the applicator. Instead of a brush, the glue comes through a fine metal cannula, so you can lay it exactly along a narrow seam or into a detailed joint without flooding the part. That control also means less waste and fewer spills, which matters on small, delicate pieces where excess glue would mark the surface. AK Interactive recommends it for jobs that need maximum control over the amount of adhesive used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFormulated for styrene, ABS and PVC\u003c\/li\u003e\n\u003cli\u003ePrecision metal nozzle (cannula)\u003c\/li\u003e\n\u003cli\u003eAccurate application on fine, detailed joints\u003c\/li\u003e\n\u003cli\u003eLess waste and spillage\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 30g\u003c\/li\u003e\n\u003cli\u003eType: plastic adhesive\u003c\/li\u003e\n\u003cli\u003eBonds: styrene, ABS, PVC\u003c\/li\u003e\n\u003cli\u003eApplicator: precision metal cannula\u003c\/li\u003e\n\u003cli\u003eMaker: AK Interactive\u003c\/li\u003e\n\u003cli\u003eMPN: AK-12027\u003c\/li\u003e\n\u003cli\u003eBarcode: 8435568344556\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AK Interactive","offers":[{"title":"Default Title","offer_id":46028089753791,"sku":"ADH-AKI-0014","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/AK12027.jpg?v=1786932481"},{"product_id":"ak-interactive-crystal-magic-glue","title":"AK Interactive: Crystal Magic Glue","description":"\u003cp\u003e\u003cstrong\u003eAK Interactive Crystal Magic Glue is a 30ml adhesive made for clear parts, bonding lenses and other transparent parts cleanly and without residue.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCrystal Magic is resin based and bonds slowly and without residue, so lenses, canopies or any part that needs clean handling stay clear. A precision cannula puts the glue exactly where it is needed.\u003c\/p\u003e\u003cp\u003eIt also fills small gaps between transparent pieces, and once dry the result is not noticeable. That opens up a second use as a modeling medium: form small gems and color them afterwards, or make vehicle headlights by painting the inside of the lamp housing with aluminum and then filling it with the glue.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMade for transparent parts\u003c\/li\u003e\n\u003cli\u003eResin based, slow and residue free bond\u003c\/li\u003e\n\u003cli\u003ePrecision cannula applicator\u003c\/li\u003e\n\u003cli\u003eFills small gaps invisibly once dry\u003c\/li\u003e\n\u003cli\u003eForms gems and headlight lenses\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVolume: 30ml\u003c\/li\u003e\n\u003cli\u003eType: resin based glue for clear parts\u003c\/li\u003e\n\u003cli\u003eApplicator: precision cannula\u003c\/li\u003e\n\u003cli\u003eMaker: AK Interactive\u003c\/li\u003e\n\u003cli\u003eMPN: AK-9323\u003c\/li\u003e\n\u003cli\u003eBarcode: 8435568331952\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AK Interactive","offers":[{"title":"Default Title","offer_id":46028089852095,"sku":"ADH-AKI-0015","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/AK9323.jpg?v=1786932483"},{"product_id":"tamiya-extra-thin-cement-40ml","title":"Tamiya: Extra-Thin Cement (40ml)","description":"\u003cp\u003e\u003cstrong\u003eTamiya Extra Thin Cement is a free-flowing liquid cement for gluing polystyrene plastic model kits, made for small parts that need pinpoint accuracy.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis cement is made to flow into the tiny gap between two plastic parts that have already been fitted together. Hold the parts in position, then touch the brush tip to the seam: the thin cement runs along the join by capillary action and softens the plastic on both faces so they bond as one piece. Because the glue goes on after the parts are lined up, you can set their position exactly first, which is what makes it so useful for small or fiddly pieces.\u003c\/p\u003e\u003cp\u003eThe 40ml bottle has a pointed brush built into the cap, so it is easy to put the cement exactly where it is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExtra thin formula for pinpoint work on small pieces\u003c\/li\u003e\n\u003cli\u003eFlows into pre-fitted joints by capillary action\u003c\/li\u003e\n\u003cli\u003ePointed brush applicator in the cap\u003c\/li\u003e\n\u003cli\u003eMade for polystyrene plastic kits\u003c\/li\u003e\n\u003cli\u003e40ml bottle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Liquid plastic cement\u003c\/li\u003e\n\u003cli\u003eVolume: 40ml\u003c\/li\u003e\n\u003cli\u003eFor: polystyrene plastic model kits\u003c\/li\u003e\n\u003cli\u003eApplicator: pointed brush in the cap\u003c\/li\u003e\n\u003cli\u003eMaker: Tamiya\u003c\/li\u003e\n\u003cli\u003eMPN: TAM-87038\u003c\/li\u003e\n\u003cli\u003eBarcode: 4950344870387\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tamiya","offers":[{"title":"Default Title","offer_id":46028089884863,"sku":"ADH-TAM-0001","price":5.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/ADH-TAM-0001-1-lead.png?v=1789919750"},{"product_id":"ak-interactive-magnet-8g-standard-density-application-brush","title":"AK Interactive: Magnet 8g Standard Density Application Brush","description":"\u003cp\u003e\u003cstrong\u003eAK Interactive Magnet 8g Standard Density is an ultra resistant cyanoacrylate glue in a medium pot with an application brush.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe brush is the point of this format. Rather than squeezing drops from a nozzle, you paint a thin, controlled film of glue onto the joint, which keeps excess away from detail and makes coverage on a pin hole or a flat mating face easy to judge.\u003c\/p\u003e\u003cp\u003eThe glue itself is the standard density cyanoacrylate of the Magnet family, suited to a wide variety of applications. It gives a durable, strong bond in just a few seconds and suits small parts with a small contact surface. The bottles are deliberately not filled to 100%: AK leaves some air inside so the glue works properly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStandard density cyanoacrylate\u003c\/li\u003e\n\u003cli\u003eBrush applicator for controlled coverage\u003c\/li\u003e\n\u003cli\u003eDurable, strong bond in a few seconds\u003c\/li\u003e\n\u003cli\u003eSuited to small parts with a small contact surface\u003c\/li\u003e\n\u003cli\u003eMedium 8g format\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 8g\u003c\/li\u003e\n\u003cli\u003eType: standard density cyanoacrylate glue\u003c\/li\u003e\n\u003cli\u003eApplicator: brush\u003c\/li\u003e\n\u003cli\u003eMaker: AK Interactive\u003c\/li\u003e\n\u003cli\u003eMPN: AK-12031\u003c\/li\u003e\n\u003cli\u003eBarcode: 8435568353442\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AK Interactive","offers":[{"title":"Default Title","offer_id":46028105187519,"sku":"ADH-AKI-0007","price":8.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/AK12031.jpg?v=1786932707"},{"product_id":"ak-interactive-whizzer-20g-super-fast-low-density","title":"AK Interactive: Whizzer 20g Super Fast Low Density","description":"\u003cp\u003e\u003cstrong\u003eAK Interactive Whizzer 20g is a low density, super fast cyanoacrylate glue for small parts that cannot be held under pressure for long.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhizzer contains additives that evaporate quickly on contact with air, and that is what lets it bond 50% faster than other cyanoacrylates. The low density lets it run into a tight joint rather than sit on top of it.\u003c\/p\u003e\u003cp\u003eSpeed is the reason to reach for it. Tiny parts with a small contact surface, and parts at an angle where you cannot keep steady pressure for long, are exactly where a slower super glue lets a piece slip before it grabs. The 20g pot is not filled to 100%: AK leaves some air inside so the glue works properly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLow density cyanoacrylate\u003c\/li\u003e\n\u003cli\u003eBonds 50% faster than other cyanoacrylates (maker figure)\u003c\/li\u003e\n\u003cli\u003eQuick evaporating additives\u003c\/li\u003e\n\u003cli\u003eSuited to small parts and parts that are hard to hold\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 20g\u003c\/li\u003e\n\u003cli\u003eType: low density, super fast cyanoacrylate glue\u003c\/li\u003e\n\u003cli\u003eMaker: AK Interactive\u003c\/li\u003e\n\u003cli\u003eMPN: AK-12028\u003c\/li\u003e\n\u003cli\u003eBarcode: 8435568353411\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AK Interactive","offers":[{"title":"Default Title","offer_id":46028138119359,"sku":"ADH-AKI-0004","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/AK12028.jpg?v=1786933250"},{"product_id":"ak-interactive-sculpting-burnishers-set","title":"AK Interactive: Sculpting Burnishers Set","description":"\u003cp\u003e\u003cstrong\u003eThe AK Interactive Sculpting Burnishers Set is a five piece set of burnishing tools for shaping putty and adding fine detail to scale models and dioramas.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAK designed these burnishers for shaping putty alongside its Carving Tools, with five pieces carrying different tips so the precise profile is always at hand. Press, smooth and push the putty into shape, then change tips as the work gets finer.\u003c\/p\u003e\u003cp\u003eThey are useful well beyond putty. Press a tip over tin foil laid on a soft surface to form vehicle headlights, burnish small pieces of leather for belts and straps on large scale models, or press them into a scene to simulate shrapnel impacts and small craters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFive burnishers with different tips\u003c\/li\u003e\n\u003cli\u003eMade for shaping putty\u003c\/li\u003e\n\u003cli\u003eForm headlights by pressing tin foil over a soft surface\u003c\/li\u003e\n\u003cli\u003eBurnish small leather parts for belts and straps at large scales\u003c\/li\u003e\n\u003cli\u003eSimulate shrapnel impacts and small craters on scenes\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's In The Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e5 x sculpting burnishers\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Sculpting burnisher set\u003c\/li\u003e\n\u003cli\u003eMaker: AK Interactive\u003c\/li\u003e\n\u003cli\u003eMPN: AK-9052\u003c\/li\u003e\n\u003cli\u003eBarcode: 8435568306110\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AK Interactive","offers":[{"title":"Default Title","offer_id":46028301074623,"sku":"PUT-AKI-0003","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/AK9052.jpg?v=1786933714"},{"product_id":"ak-interactive-elastic-masking-putty","title":"AK Interactive: Elastic Masking Putty","description":"\u003cp\u003e\u003cstrong\u003eAK Interactive Elastic Masking Putty is a reusable camouflage putty for masking areas of a scale model when airbrushing.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePress the putty over the areas you want to protect, whether that is the edge of a camouflage pattern or parts such as wheels or clear parts that should stay unpainted, then airbrush over the top. It adapts to any surface, leaves no residue, does not stain and is grease free, so it lifts away cleanly without damaging the painted areas around it.\u003c\/p\u003e\u003cp\u003eFor the best result, apply it just before painting and remove it as soon as the paint has dried. Do not leave it on the model for a long time, as that can make the putty deteriorate. The pack holds 80 g and can be used again.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReusable elastic masking putty\u003c\/li\u003e\n\u003cli\u003eLeaves no residue, does not stain and is grease free\u003c\/li\u003e\n\u003cli\u003eRemoves without damaging painted areas\u003c\/li\u003e\n\u003cli\u003eFor camouflage patterns and masking wheels or clear parts\u003c\/li\u003e\n\u003cli\u003eAdapts to any surface\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Masking putty\u003c\/li\u003e\n\u003cli\u003eWeight: 80 g\u003c\/li\u003e\n\u003cli\u003eMaker: AK Interactive\u003c\/li\u003e\n\u003cli\u003eMPN: AK-8076\u003c\/li\u003e\n\u003cli\u003eBarcode: 8435568300705\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AK Interactive","offers":[{"title":"Default Title","offer_id":46028338593983,"sku":"PUT-AKI-0001","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/AK8076.jpg?v=1786934315"},{"product_id":"vallejo-model-color-auxiliary-plastic-putty-18ml","title":"Vallejo: Model Color Auxiliary Plastic Putty (18ml)","description":"\u003cp\u003e\u003cstrong\u003ePlastic Putty, a Vallejo auxiliary product, reference 70.400, an 18ml water-based filler for fixing gaps and fit defects on scale models of vehicles and figures.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVallejo Plastic Putty is a light, fluid putty with a water-based formula, made to fix fit defects and gaps on scale models of vehicles and figures. Because it is fluid, it can be applied with a brush or worked in with a spatula, and it dries to a matt white finish.\u003c\/p\u003e\u003cp\u003eOnce dry, the filled areas can be primed or painted without any problem, so the repair disappears under the paint scheme. Diluted, the putty can also represent surface textures, such as cast armor or rust, on a model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLight, fluid putty with a water-based formula\u003c\/li\u003e\n\u003cli\u003eFixes fit defects and gaps on vehicles and figures\u003c\/li\u003e\n\u003cli\u003eApply with a brush or a spatula\u003c\/li\u003e\n\u003cli\u003eDries matt white and can be primed or painted\u003c\/li\u003e\n\u003cli\u003eDilute it to represent textures such as cast armor or rust\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Water-based filler putty\u003c\/li\u003e\n\u003cli\u003eRange: Vallejo Auxiliary Products\u003c\/li\u003e\n\u003cli\u003eFinish: Matt white when dry\u003c\/li\u003e\n\u003cli\u003eReference: 70.400\u003c\/li\u003e\n\u003cli\u003eVolume: 18ml\u003c\/li\u003e\n\u003cli\u003eSafety: Always follow the information on the product label. Contains 1,2-benzisothiazol-3(2H)-one, Reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May cause allergic reactions.\u003c\/li\u003e\n\u003cli\u003eMPN: VAL-70400\u003c\/li\u003e\n\u003cli\u003eBarcode: 8429551704007\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vallejo","offers":[{"title":"Default Title","offer_id":46028338626751,"sku":"PUT-VAL-0001","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/vallejo-auxiliaries-plastic-putty-70400.jpg?v=1786934317"},{"product_id":"ak-interactive-magnet-20g-high-density","title":"AK Interactive: Magnet 20g High Density","description":"\u003cp\u003e\u003cstrong\u003eAK Interactive Magnet 20g High Density is a thick cyanoacrylate glue for gappy joints, uneven surfaces and porous materials.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThin super glues run off anything that does not fit tightly. High density cyanoacrylate is viscous enough to bridge a gap, which is why it suits joints with gaps, uneven surfaces or more porous materials.\u003c\/p\u003e\u003cp\u003eIt also fills cracks and stays put on vertical applications where other adhesives drip. And because it takes longer before it cures, you get more positioning time to set a part exactly before it locks. The 20g pot is deliberately not filled to 100%: AK leaves some air inside so the glue works properly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh density, high viscosity cyanoacrylate\u003c\/li\u003e\n\u003cli\u003eBridges gaps and uneven surfaces\u003c\/li\u003e\n\u003cli\u003eFills cracks\u003c\/li\u003e\n\u003cli\u003eDoes not drip on vertical work\u003c\/li\u003e\n\u003cli\u003eMore positioning time before curing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 20g\u003c\/li\u003e\n\u003cli\u003eType: high density cyanoacrylate glue\u003c\/li\u003e\n\u003cli\u003eMaker: AK Interactive\u003c\/li\u003e\n\u003cli\u003eMPN: AK-12029\u003c\/li\u003e\n\u003cli\u003eBarcode: 8435568353428\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AK Interactive","offers":[{"title":"Default Title","offer_id":46028372050111,"sku":"ADH-AKI-0005","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/AK12029.jpg?v=1786934929"},{"product_id":"ak-interactive-magnet-20g-low-density","title":"AK Interactive: Magnet 20g Low Density","description":"\u003cp\u003e\u003cstrong\u003eAK Interactive Magnet 20g Low Density is a thin cyanoacrylate glue for photo etched metal, tight fitting parts and capillary bonding.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eLow viscosity is the whole point. A thin super glue flows into a joint that is already closed, so you can seat a part first and then let a touch of glue wick into the seam by capillary action. That makes it the right choice for photo etched metal, every kind of metal joint, tight fitting parts with no gaps, and micro cracks.\u003c\/p\u003e\u003cp\u003eIt is the wrong glue for a gappy fit, where a thick cyanoacrylate does better. The 20g pot is deliberately not filled to 100%: AK leaves some air inside so the glue works properly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLow density, low viscosity cyanoacrylate\u003c\/li\u003e\n\u003cli\u003eBonds photo etched and other metal parts\u003c\/li\u003e\n\u003cli\u003eFor tight fitting joints with no gaps\u003c\/li\u003e\n\u003cli\u003eWicks into seams and micro cracks by capillary action\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 20g\u003c\/li\u003e\n\u003cli\u003eType: low density cyanoacrylate glue\u003c\/li\u003e\n\u003cli\u003eMaker: AK Interactive\u003c\/li\u003e\n\u003cli\u003eMPN: AK-12030\u003c\/li\u003e\n\u003cli\u003eBarcode: 8435568353435\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AK Interactive","offers":[{"title":"Default Title","offer_id":46028372082879,"sku":"ADH-AKI-0006","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/AK12030.jpg?v=1786934929"},{"product_id":"ak-interactive-magnet-3g-standard-density","title":"AK Interactive: Magnet 3g Standard Density","description":"\u003cp\u003e\u003cstrong\u003eAK Interactive Magnet 3g Standard Density is an ultra resistant cyanoacrylate glue in a small 3g tube.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is the standard density cyanoacrylate of AK's Magnet family, the all rounder suited to a wide variety of applications. It gives a durable, strong bond in just a few seconds and is suited to small parts with a small contact surface.\u003c\/p\u003e\u003cp\u003eThe 3g tube is the small format of the range, and AK sizes the Magnet formats to suit the needs of each user. The tubes are deliberately not filled to 100%: AK leaves some air inside so the glue works properly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStandard density cyanoacrylate\u003c\/li\u003e\n\u003cli\u003eDurable, strong bond in a few seconds\u003c\/li\u003e\n\u003cli\u003eSuited to small parts with a small contact surface\u003c\/li\u003e\n\u003cli\u003eSmall 3g tube\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSize: 3g\u003c\/li\u003e\n\u003cli\u003eType: standard density cyanoacrylate glue\u003c\/li\u003e\n\u003cli\u003eFormat: tube\u003c\/li\u003e\n\u003cli\u003eMaker: AK Interactive\u003c\/li\u003e\n\u003cli\u003eMPN: AK-12032\u003c\/li\u003e\n\u003cli\u003eBarcode: 8435568353459\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AK Interactive","offers":[{"title":"Default Title","offer_id":46028372115647,"sku":"ADH-AKI-0008","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/AK12032.jpg?v=1786934930"},{"product_id":"ak-interactive-multifunction-bar-tool-for-putty","title":"AK Interactive: Multifunction Bar Tool for Putty","description":"\u003cp\u003e\u003cstrong\u003eThe AK Interactive Multifunction Bar Tool for Putty is a straight stainless steel spatula for applying and spreading putty on scale models.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAK calls it one of the essential tools for a scale modeling workbench. The straight blade picks up putty, lays it where it is needed and then distributes it in a precise manner, so a gap or seam can be filled with control and a clean edge.\u003c\/p\u003e\u003cp\u003eIt doubles as a mixing and stirring tool for putty and other hobby materials on the bench. The stainless steel is easy to clean and very resistant, so it can be wiped down after each job and kept in service for a long time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStraight stainless steel spatula\u003c\/li\u003e\n\u003cli\u003eApplies putty and distributes it precisely\u003c\/li\u003e\n\u003cli\u003eAlso useful for mixing and stirring\u003c\/li\u003e\n\u003cli\u003eEasy to clean\u003c\/li\u003e\n\u003cli\u003eVery resistant\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Putty spatula\u003c\/li\u003e\n\u003cli\u003eMaterial: Stainless steel\u003c\/li\u003e\n\u003cli\u003eMaker: AK Interactive\u003c\/li\u003e\n\u003cli\u003eMPN: AK-9169\u003c\/li\u003e\n\u003cli\u003eBarcode: 8435568308466\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AK Interactive","offers":[{"title":"Default Title","offer_id":46028372279487,"sku":"PUT-AKI-0004","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/AK9169-2.jpg?v=1786934933"},{"product_id":"ak-interactive-modelling-green-putty-high-quality","title":"AK Interactive: Modelling Green Putty - High Quality","description":"\u003cp\u003e\u003cstrong\u003eAK Interactive Modelling Green Putty is a high quality, superfine grained filler for gaps and seams on scale models and miniatures.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis is a one component polyurethane putty, so there is nothing to mix before you start. Spread it with a spatula or other tool onto a clean, dry, grease free surface and let it dry. It sets to a hard finish with high adhesion and no shrinkage, so a filled seam stays level as it dries.\u003c\/p\u003e\u003cp\u003eBeing water based, it is non flammable, contains no organic solvents and cleans up with water, which keeps tools easy to look after.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuperfine grained green putty\u003c\/li\u003e\n\u003cli\u003eHigh adhesion and a hard finish\u003c\/li\u003e\n\u003cli\u003eNo shrinkage when drying\u003c\/li\u003e\n\u003cli\u003eOne component, water based polyurethane\u003c\/li\u003e\n\u003cli\u003eNon flammable, no organic solvents\u003c\/li\u003e\n\u003cli\u003eCleans up with water\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: One component water based putty\u003c\/li\u003e\n\u003cli\u003eVolume: 20ml\u003c\/li\u003e\n\u003cli\u003eMaker: AK Interactive\u003c\/li\u003e\n\u003cli\u003eMPN: AK-9329\u003c\/li\u003e\n\u003cli\u003eBarcode: 8435568334281\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AK Interactive","offers":[{"title":"Default Title","offer_id":46028372377791,"sku":"PUT-AKI-0002","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/AK9329_web.jpg?v=1786934935"},{"product_id":"army-painter-sculpting-tools","title":"Army Painter: Sculpting Tools","description":"\u003cp\u003e\u003cstrong\u003eArmy Painter Sculpting Tools are a set of three hobby tools for shaping putty, sculpting new detail and converting miniatures.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe set gives you three sculpting tools with six differently shaped tips between them, so there is a profile to hand for pushing putty into place, smoothing a surface or working in finer detail. The Army Painter describes them as versatile tools for any sculpting project, from closing a gap between two parts to building up new detail on a conversion.\u003c\/p\u003e\u003cp\u003eThey are made to work with Green Stuff, the two component putty hobbyists use for conversions, filling mold lines and sculpting. Shape the putty while it is soft, then switch tips as the work gets finer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThree sculpting tools\u003c\/li\u003e\n\u003cli\u003eSix different tips across the set\u003c\/li\u003e\n\u003cli\u003eVersatile shapes for any sculpting project\u003c\/li\u003e\n\u003cli\u003eWorks well with Green Stuff putty\u003c\/li\u003e\n\u003cli\u003eSuited to conversions, gap filling and sculpting detail\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's In The Box\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e3 x sculpting tools\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Sculpting tools\u003c\/li\u003e\n\u003cli\u003eMaker: The Army Painter\u003c\/li\u003e\n\u003cli\u003eMPN: ARMYP-TL5036\u003c\/li\u003e\n\u003cli\u003eBarcode: 5713799503601\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Army Painter","offers":[{"title":"Default Title","offer_id":46028372934847,"sku":"PUT-ARP-0002","price":15.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/TL5036P_0.jpg?v=1786934945"},{"product_id":"army-painter-green-stuff","title":"Army Painter: Green Stuff","description":"\u003cp\u003e\u003cstrong\u003eArmy Painter Green Stuff is the original Kneadatite two component epoxy putty, used by hobbyists for conversions, filling mold lines and sculpting miniatures.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eGreen Stuff comes as two separate components that stay soft and workable until you knead them together. Once the two are mixed, the putty begins to cure and hardens fast, so mix a small portion at a time and shape it while it is still soft. It kneads quickly and easily, so preparing a fresh batch takes little time.\u003c\/p\u003e\u003cp\u003eUse it to fill gaps and hide mold lines, to add bits to a model, or to sculpt new detail directly onto a miniature for a conversion. Kneadatite is the putty model makers and hobbyists know best as Green Stuff.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe original Kneadatite, known as Green Stuff\u003c\/li\u003e\n\u003cli\u003eTwo component epoxy putty that hardens fast once mixed\u003c\/li\u003e\n\u003cli\u003eFast and easy to knead\u003c\/li\u003e\n\u003cli\u003eFills gaps and hides mold lines\u003c\/li\u003e\n\u003cli\u003eFor conversions and sculpting miniatures\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: Two component epoxy putty\u003c\/li\u003e\n\u003cli\u003eMaker: The Army Painter\u003c\/li\u003e\n\u003cli\u003eMPN: ARMYP-TL5037\u003c\/li\u003e\n\u003cli\u003eBarcode: 5713799503700\u003c\/li\u003e\n\u003cli\u003eCondition: New\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Army Painter","offers":[{"title":"Default Title","offer_id":46028372967615,"sku":"PUT-ARP-0001","price":15.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/files\/TL5037P_0.jpg?v=1786934946"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/5997\/6895\/collections\/tile-collection-glue-putty.png?v=1790122803","url":"https:\/\/chapmengames.com\/collections\/glue-putty.oembed","provider":"Chapmen Games","version":"1.0","type":"link"}